Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.

Although our articles cover validation extensively, let’s redefine it. According to ASQA, validation is a quality review of the assessment process.

Simply put, validation confirms which aspects of an RTO's assessment process are right and identifies where improvements are needed. A clear understanding of its main components makes it less intimidating.

As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The initial assessment validation ensures your RTO's assessments comply with the training package requirements.

The following validation type ensures that assessments follow the principles of assessment and rules of evidence.

This indicates validation occurs before and after the assessment process. We will focus on the first type: assessment tool validation.

An Overview of the Two Types of Assessment Validation

Clarifying Assessment Validation

As mentioned earlier and in our earlier blog entries, validation is divided into two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.

Post-assessment validation, in contrast, is about the implementation, requiring Registered Training Organisations to conduct assessments adhering to the Principles of Assessment and Rules of Evidence.

This article will focus on assessment tool validation.

How to Properly Conduct Assessment Tool Validation

Having reviewed the two types of validation, let’s dive into the specifics of assessment tool validation.

When Should You Conduct Assessment Tool Validation?

The aim of assessment tool validation is to make sure that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.

Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.

No need to wait for the next validation schedule in your 5-year cycle. Validate new resources immediately to ensure they’re suitable for students.

However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:

- resources are updated
- your new training products get added on scope
- course gets reviewed against training product updates
- learning resources get identified as a risk during your risk assessment

The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.

What Training Products Should Be Validated?

It's important to remember this validation ensures that all learning resources are compliant before use. All RTOs need to validate resources for each unit.

Assessment Tool Validation: Required Resources

Training Materials

For validating your assessment tools, you will need the full array of your learning resources:

Mapping tool – the first document to check. It indicates which assessment items align with unit requirements, making validation faster.

Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.

Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – such as checklists, registers, and templates created independently from the workbook and marking guide. Validate them to ensure they are suitable for the assessment task and address unit requirements.

Validation Board

Clause 1.11 describes the requirements for validation panel members, indicating that validation can be performed by one or more persons. RTOs often require all trainers and assessors to attend, and sometimes industry experts are invited.

In total, your validation panel must have:

Relevant vocational competencies and industry skills applicable to the unit being validated

Recent expertise and skills in vocational teaching and learning

Any one of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or an equivalent successor

Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool is beneficial for both the validation process and documentation. It makes it easier to understand how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves as documented proof that you have validated your resources before student use.

ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.

Assessment Principles Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.

It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Assessment Instructions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Needs Inspection?

As noted in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.

Core Principles of Assessment
Fairness – Does the assessment process ensure equal opportunity and access for everyone?

Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Is the assessment evaluating what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment give the same results every time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Fundamental Rules of Evidence

Validity – Does the evidence indicate that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool prove that the work is the candidate’s own?

Currency – Are the assessment tools in line with current units of competency and contemporary industry practices?

Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:

Live Up to Your Words

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

nappying

bottle preparation, feeding infants from bottles, and cleaning equipment

solid food preparation and feeding babies

respond appropriately to baby signs and cues

prepare infants for sleep and soothe them

monitor and encourage suitable physical exploration and gross motor skills for the age

Getting students to describe changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Be Mindful of Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.

Full Compliance or Not Competent

Pay attention to lists. As mentioned earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you more info be more specific?
Could You Be Clearer?

Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What information can be included in a work package?

Possible answers may include:

Needed resources

Appropriate costs

Time assigned for activities

Assigned roles and responsibilities

When an assessment item calls for multiple answers, indicate the number of answers a student needs to provide. This way, your assessment is reliable, and the evidence gathered is valid.

The same is true for assessment items with double-barrelled questions or those asking for multiple answers at once. Such questions can confuse both students and assessors, as demonstrated in the sample question below:

Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.

Possible answers could include, but are not limited to:

Weather conditions – work area isolation, engineering controls, personal protective equipment

Work area and ground conditions – elimination, isolation, engineering

People – isolation, use of engineering controls, administrative controls

Structural hazards – substitution, isolation, use of engineering controls

Chemical hazards – isolation, engineering, administrative controls

Equipment or machinery – isolation, use of engineering controls, administrative controls

Avoiding double-barrelled questions makes it easier for students to answer and for assessors to judge competence accurately.

Given these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” But these guarantees require waiting for an audit before rectifying noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.